D-link Wbr-2310 Driver For Mac
D-link Wbr-2310 Driver For Mac
The following procedure should get you a connection with any broadband modem that is configured to use DHCP for the router connection, such as cable modems, and many DSL modems. If you require PPPoE configuration for the DSL modem, that will have to be configured to match the ISP requirements. Note that the wireless encryption and channel selection will have to be done after the basic wired connection is established, the first step is to get wired connections working. Reset the router to factory defaults by holding the reset button down for 15 seconds with power on. Turn off everything, the modem, router, computer. Connect the modem to the router's WAN/Internet port.
Connect the computer to one of the router's LAN/Network ports. Turn on the modem, wait for a steady connect light. Turn on the router, wait for two minutes. Boot the computer. When the computer is completely booted, let's see this. Hold the Windows key and press R, then type CMD ( COMMAND for W98/WME) to open a command prompt: NOTE: For the items below in red surrounded with, see comments below for the actual information content, they are value substitutions from the previous command output!
D-link Wbr-2310 Driver For Mac Free
In the command prompt window that opens, type type the following commands one at a time, followed by the Enter key: IPCONFIG /ALL PING PING PING PING 206.190.60.37 PING yahoo.com Right click in the command window and choose Select All, then hit Enter to copy the contents to the clipboard. Paste the results in a message here. The IP Address of your computer, obtained from the IPCONFIG command above. The IP address of the Default Gateway, obtained from the IPCONFIG command above.
The IP address of the first (or only) address for DNS Servers, obtained from the IPCONFIG command above. If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here. Microsoft Windows XP Version 5.1.2600 (C) Copyright 1985-2001 Microsoft Corp. Microsoft Windows XP Version 5.1.2600 (C) Copyright 1985-2001 Microsoft Corp.
Receive Transmit WAN 4133 Packets 56 Packets LAN 808 Packets 587 Packets WIRELESS 11g 0 Packets 339 Packets Network Settings: Use this section to configure the internal network settings of your router and also to configure the built-in DHCP Server to assign IP addresses to the computers on your network. The IP Address that is configured here is the IP Address that you use to access the Web-based management interface.
D-link Wbr-2310 Driver For Mac Pro
If you change the IP Address here, you may need to adjust your PC's network settings to access the network again. Router Settings: Use this section to configure the internal network settings of your router. The IP Address that is configured here is the IP Address that you use to access the Web-based management interface. If you change the IP Address here, you may need to adjust your PC's network settings to access the network again.